Introduction
Industrial videoborescopes are essential tools for remote visual inspection (RVI) in demanding sectors like automotive, aerospace, power generation, casting, and nuclear plants. At MAARGTECH, we supply advanced yet economical solutions such as the Mitcorp X2000 HD, X750 HD, and X3000 HD videoborescopes — built tough with IP67-rated tungsten-braided probes, 1m drop resistance, and heat tolerance up to 100°C.
When it comes to industrial videoborescope maintenance, even the most rugged equipment requires proper care to ensure consistent performance. Regular maintenance not only enhances inspection accuracy but also extends the lifespan of your device, protecting your investment and minimizing costly downtime.
Here’s a practical, step-by-step guide covering cleaning, storage, and longevity for your industrial videoborescope.
1. Clean the Probe Tip and Lens After Every Use
The optical tip is the “eye” of your videoborescope. Dust, grease, or residue can blur images and affect 3D measurements.
How to do it right:
- Use the cleaning kit supplied with your unit or a soft, lint-free microfiber cloth.
- Lightly dampen with isopropyl alcohol (70% solution) — never spray directly on the lens.
- Gently wipe in a circular motion. For stubborn spots, use a cotton swab.
- Dry completely before storage.
Pro tip: Clean before and after every inspection. A 30-second routine prevents most image-quality issues.
2. Wipe Down the Insertion Tube and Cable
Tungsten-braided probes resist abrasion, but oil, metal shavings, and moisture can still build up and cause long-term wear.
Quick routine:
- Wipe the entire insertion tube with a damp (not soaking) cloth using mild detergent if needed.
- Pay special attention to articulation joints and the connector area.
- Rinse only the probe tip if it’s IP67-rated — never immerse the main unit.
Regular cleaning keeps 4-way articulation smooth for years.
3. Store Your Videoborescope in Its Protective Case
Improper storage is one of the top causes of premature failure.
Best practices:
- Always coil the insertion tube in large loops (minimum 30 cm radius) to avoid kinks.
- Place the unit in the original hard-shell carrying case with foam inserts.
- Store in a cool, dry place (ideally 5–35°C) away from direct sunlight, chemicals, and high humidity.
- Keep the case upright or on its side — never stack heavy items on top.
Proper storage can extend the life of your system by 2–3 years.
4. Inspect Cables, Connectors, and Articulation Daily
Small cracks or loose pins can lead to expensive repairs.
5-minute checklist:
- Visually check the cable sheath for cuts, abrasions, or bulges.
- Gently tug connectors to ensure they’re secure.
- Test articulation movement before and after use.
- Look for moisture inside the base unit and wipe dry immediately.
5. Follow Proper Battery and Power Management
Most videoborescopes are fully portable with rechargeable batteries.
Simple rules for longer battery life:
- Charge only with the original adapter.
- Avoid full discharge — recharge when it drops below 20%.
- Remove the battery if the unit will be unused for more than two weeks.
- Store batteries at 50–70% charge in a cool environment.
6. Keep Firmware and Software Updated
Modern videoborescopes offer advanced features like Wi-Fi, HDMI output, and 3D measurement that improve with updates.
How to stay current:
- Check for firmware updates every 3–6 months.
- Update your inspection software on connected PCs or tablets.
- Back up images and videos regularly to the SD card.
7. Schedule Annual Professional Servicing and Calibration
Even with perfect daily care, internal wear happens over time.
Recommended schedule:
- Annual calibration (especially for measurement-enabled models).
- Professional cleaning and seal inspection every 12–18 months or after 500 hours of use.
- MAARGTECH provides fast turnaround and genuine spare parts.
Why These Tips Matter for Your Operations
Following this 7-tip routine takes just a few minutes per day but delivers crystal-clear images, fewer breakdowns, and significantly lower total cost of ownership.
At MAARGTECH, we don’t just sell videoborescopes — we partner with you for long-term reliability. Our Mitcorp range is trusted across industries for its perfect balance of advanced technology and real-world durability.
Upgrade Your Inspection with the Right Tools!
Get reliable, high-performance industrial videoborescopes tailored to your needs. Connect with MAARGTECH experts today for the best solution and support.
Frequently Asked Questions (FAQ'S )
How often should I clean my industrial videoborescope?
You should clean your industrial videoborescope after every use, especially the probe and camera tip, to prevent dirt buildup and maintain clear inspection results.
What is the best way to clean a videoborescope probe?
Use a soft, lint-free cloth with a mild, approved cleaning solution. Avoid harsh chemicals, as they can damage the probe’s outer layer and reduce its lifespan.
How should I store an industrial videoborescope properly?
Store it in a protective case in a dry, dust-free environment. Avoid extreme temperatures and humidity to protect internal components and ensure long-term performance.
What are common mistakes that damage videoborescopes?
Common mistakes include bending the probe beyond its limit, improper cleaning, exposure to moisture, and forcing the probe into tight spaces without care.
How can I extend the lifespan of my videoborescope?
Regular cleaning, careful handling, proper storage, and following manufacturer guidelines can significantly extend the lifespan of your videoborescope.